POWER LIVING - TP-900 Bladeless Fan with Four-in-One Function: Cooling, Heating, Air Purification, and Sterilization

This 4-in-1 function includes plasma sterilization, heating and cooling air supply, and Hepa air purification. It uses bipolar shielding ionization technology (DBD) to release high-energy charged positive and negative ions. These ions actively collide and attack each other, forming grape-like ion clusters. These highly oxidizing ion clusters surround harmful substances, odors, bacteria, mold, and viruses in the air, decomposing or deactivating them, thereby achieving the effects of purification, disinfection, and sterilization.
Laboratory reports confirm its effectiveness in removing HCO-V229E coronavirus, formaldehyde, benzene, TVOC, H1N1 influenza A virus, Staphylococcus aureus, Escherichia coli, and Aspergillus niger. Real-time air quality monitoring with 4-color LED lights displaying real-time air quality changes. Safe bladeless design, preventing accidental injury to children and pets from the blades.
80-degree wide-angle heating and cooling air supply with a heating power of up to 1950 watts.
PTC ceramic heating EU standard H13 high-efficiency HEPA air purifier filter, which can effectively filter 99.97% of PM2.5 particles.
Air supply range up to 250 square feet
It provides cool air in summer, can be used for ventilation and drying clothes in spring, and provides warm air in autumn and winter.
10 cool air settings / 3 warm air settings
3-second instant heating function, up to 9 hours of intelligent timer, anti-tipping, automatic power-off, and reinforced chassis.

Frequently Asked Questions (FAQ)

How does the airflow principle of the TP-900 differ from that of traditional fans?
The TP series bladeless fan draws in air from the bottom inlet, and after being powered by a high-speed motor and turbocharger, it blows out a stable and strong airflow evenly from the fan ring. It does not require traditional fan blades to cut the air, resulting in a gentler breeze.

Does the warm air blow out immediately produce hot air?
After selecting the warm air mode, the built-in PTC ceramic heating element begins to heat up. The air is gradually heated after passing through the heating element, and you can feel the warm airflow in a short time.

How many levels of heating mode are there? How are they displayed?
The heating mode has three levels: high, medium, and low. The screen will display H (high), M (medium), and L (low) to indicate the different levels.

Why does the heater automatically shut down and go into standby mode after running for a while?
When the ambient temperature reaches approximately 35°C, the machine will automatically enter standby mode to prevent overheating. Once the temperature drops, it will automatically restart the heating mode.

Why did the aircraft suddenly stop working?
If the unit tipes over or overheats, the built-in automatic power-off protection will activate. You will need to unplug the power, allow it to cool down, clear any blockages in the air intake, and then restart it.

Is it safe to touch the device if it gets hot?
When the heater is running or has just been turned off, the fan coil unit is quite hot and should not be touched directly. Families with young children should keep children away from the unit and wait until it has completely cooled down before moving or cleaning it.

How often should the HEPA filter be replaced? Can it be washed?
It is recommended to replace the filter every 3–6 months depending on the frequency of use. The filter is not washable and can only be replaced periodically. It is recommended to purchase genuine filters from the Power Living official website.

What is the function of the HEPA filter in the TP-900?
High-efficiency HEPA filters can block dust and fine suspended particles in the air, helping to improve indoor air quality, and are especially suitable for urban homes.

How to clean the TP-900 on a daily basis?
Before cleaning, the power must be unplugged. If the heater has been used, wait 1–2 hours for it to cool completely. The outer casing can be wiped with a dry or slightly damp cloth. Avoid using cleaning agents or polishing agents. The air inlet and the small holes inside the fan can be cleaned of dust and blockages with a soft brush.