POWER LIVING - Universal Cordless Dual-Axis Roller Brush Vacuum Cleaner V30

• Power Living V30 Cordless Dual-Axis Roller Brush Vacuum Cleaner
• Upgraded dual-axis roller brush: Forward and backward suction, double the cleaning power in one pass.
• Innovative 360° free omnidirectional control, easily bypassing furniture and narrow corners, enabling flexible cleaning from multiple directions.
• With an ultra-high 100,000 RPM brushless motor and a powerful 16kPa vacuum suction, vacuuming is faster and more enjoyable.
• The ultra-lightweight 700g main unit makes vacuuming effortless with one hand.
• The design allows it to lie flat in a straight line, enabling deep cleaning under sofas and cabinets.
• Equipped with a dust mite removal nozzle, it thoroughly cleans mattresses, pillows, and sofas.
• The included charging dock makes it more convenient to place and charge the main unit.
• This 2-in-1 flat brush can reach into narrow crevices and clean areas that are normally difficult to reach.
• Multiple noise reduction technologies reduce noise to 72dB at high speeds.
• The high-speed mode provides approximately 11 minutes of battery life, while the standard mode provides approximately 22 minutes.
• High-capacity 3-cell 2000mAh lithium battery

Frequently Asked Questions (FAQ)

What types of flooring is the V30 suitable for? Can it be used on carpets?
The V30 is suitable for various indoor hard floors, such as wood flooring, ceramic tile, marble, and vinyl flooring. When used with a floor brush, it can also be used for general carpet cleaning, but its effectiveness will be slightly reduced on uneven floors.

What are the voltage and power of V30?
The V30 has a rated voltage of approximately DC 11.1V, a rated power of approximately 120W, and a suction vacuum of approximately 16kPa±10%.

How long does it take to charge the V30? What are some suggestions for first-time users?
Charging time is approximately 4–6 hours. The device has a factory charge of approximately 30%. For first-time use, it is recommended to charge continuously for more than 4 hours to help improve battery life.

My V30 won't charge? Can I use any charger?
It can be charged using a USB Type-C adapter with a suitable 5V/1A, 2A or 3A power supply, or by placing it on the included charging dock. Do not use an incompatible adapter to avoid damaging the device.

What does it mean if the screen displays "E1" or there is no response?
If the adapter displays code E1 or there is no response after plugging it in, it is usually related to a voltage mismatch. You need to check whether the adapter is DC 5V and meets the specified output, otherwise it may cause the device to fail to charge properly.

What does "FU" mean when displayed on the screen?
Please refer to page 11 of the instruction manual, "Cleaning and Maintenance", to clean the dust cup, metal mesh, or the HEPA filter inside.

What do the percentages and graphs displayed on an LED display mean?
A7: The screen displays the remaining battery percentage, with 100% for a full charge. It is recommended to charge the battery as soon as possible when the percentage drops below 10%. It also displays a dust cup full warning and a battery overheat protection warning, making it easy for users to determine whether to clean the dust cup or pause use.

How many suction levels does the V30 have? How do I switch between them?
The V30 has two modes: large and small. You can start it by pressing the power button and then switch between large and small modes by pressing the mode button to suit different ground conditions and garbage situations.

Which parts can be washed? What precautions should be taken when cleaning them?
The dust cup and metal filter can be washed directly with water. For the HEPA filter, it is recommended to clean the dust by tapping or shaking it off. It should not be washed with water. All accessories must be completely air-dried before reinstallation and use.

What should I do if the V30 suction power weakens or there is an odor?
If the suction power decreases significantly or you smell an odor, check if the roller brush is tangled with hair, if the nozzle or pipes are clogged, and if the dust cup, metal filter, and HEPA filter are too dusty. If the problem persists after cleaning, stop using the product and contact after-sales service.